I'm not a big mountain trout fisherman, although one day I hope to explore that avenue in this amazing world of fishing. Regardless, if you fish, you'll enjoy this video/poem. The last few lines are perfect.
Wednesday, April 29, 2015
Monday, April 13, 2015
GoPro Alternative Power Sources
If you have tried using a GoPro to capture your fishing excursions, you know how pitiful the battery life is. And if you fish from a kayak, you know how much of a pain it is to switch out batteries. For me, my hands are constantly wet, not to mention many of the places I go have wind, waves, spray, and many other variables that make me more than a little nervous when I have the housing open. So, I did some homework on alternative power sources for GoPro Heroes(newer models) and thought I'd share.
First up, for those of you with the Hero 3+, the Brunton All-Day battery pack was a great choice for me. It snaps on to the back of your case and lasts a long time. I don't record constantly, as in I use my GoPro remote and start and stop recording as I see fit during the trip. I maxed out a 32gb card in a few hours and turned the camera off with the wifi still on. The next day, the blue wifi light was still blinking. I heard from a few others who have the Brunton All-Day and some say they wanted more battery life and bought two to switch out on the water. They had much larger memory cards and recorded constantly the entire time on the water. Over all though, I was very happy with it. Keep in mind that it's not meant to be submerged. It has no problem being splashed on so it served as my bow camera where I didn't intend to actually put it in the water. One other thing I would recommend is switching the black O-ring that comes on the Brunton with the white one that is on the back door (that you removed to put the Brunton on). The black one was thinner and let a tiny bit of moisture in as opposed to the original GoPro gasket which was nice and tight.
When I decided to upgrade to a Hero4 Black, the Brunton All-Day was no longer an option since it does not fit. Although, I did hear a rumor that one will be available for the Hero4 in the near future.
My continued quest lead me to what I believe is a game changer. There are multiple pieces and it starts with a 30Pin-to-USB power cable with waterproof backdoor (link).
It's $23.90 + $4.90 for shipping. It fits the Hero 3+ and the Hero 4.
Basically, you just plug it in the back of the camera, snap on the door and shut it like you normally would.
Next you need cable glands (size PG7) and a waterproof container for the battery. For my bow camera I just used a food storage box that I found for a few bucks at Target. I drilled a hole to match the end of the cable gland and screwed it into place I added an o-ring (plumbing section in hardware store) between the outside wall of the box and contact point of the cable gland just for added waterproofing. Then I cut the USB cable about 10-12 inches from the plug and passed it through the gland. Tightened down the gland onto the cable then spliced the cable back together. There are only two wires in the USB cable so it's easy to do. You can look up how-to videos, but I just stripped off about an inch of the outside cable material and half an inch off the wires, slid on heat shrink wrap (or electrical tape works as well at the end), twisted the two wire ends together, and added a little solder (optional) for extra reinforcement. Then you can either wrap it with electrical tape or shrink the heat wrap with a lighter.
I mainly use a YakAttack Panfish Portrait for the bow camera and simply tuck the battery box into the main hatch. The cable is long enough to use extension accessories like the Dog Bone as well and still stow the battery below deck.
I chose two different types of batteries. For the bow camera I got a 10,000 mAh power bank. To give you an idea, the Hero 4 battery is 1160 mAh and the Brunton All-Day is 4000 mAh. The 10,000 mAh battery will last a long time. For the monopod (or YakAttack Boomstick), I opted for a smaller, lighter 5200mAh battery. The keep the weight and bulk down, I used a heavy duty ziplock type bag to keep the battery dry. I added stainless steel washers, neoprene washers and a little contact cement for the cable gland since the plastic bag is flexible.
I've taken these set ups on 3 long trips so far and have been very happy with them. I have yet to run out of juice on the bow cam. The one on the monopod runs out after about 6.5 hrs of keeping it on the whole time with the wifi connected to the remote and maxing out a 64gb card (I upgraded the card recently). The new Smart Remote from GoPro lasted about 6 hrs as well without turning it off.
First up, for those of you with the Hero 3+, the Brunton All-Day battery pack was a great choice for me. It snaps on to the back of your case and lasts a long time. I don't record constantly, as in I use my GoPro remote and start and stop recording as I see fit during the trip. I maxed out a 32gb card in a few hours and turned the camera off with the wifi still on. The next day, the blue wifi light was still blinking. I heard from a few others who have the Brunton All-Day and some say they wanted more battery life and bought two to switch out on the water. They had much larger memory cards and recorded constantly the entire time on the water. Over all though, I was very happy with it. Keep in mind that it's not meant to be submerged. It has no problem being splashed on so it served as my bow camera where I didn't intend to actually put it in the water. One other thing I would recommend is switching the black O-ring that comes on the Brunton with the white one that is on the back door (that you removed to put the Brunton on). The black one was thinner and let a tiny bit of moisture in as opposed to the original GoPro gasket which was nice and tight.
When I decided to upgrade to a Hero4 Black, the Brunton All-Day was no longer an option since it does not fit. Although, I did hear a rumor that one will be available for the Hero4 in the near future.
My continued quest lead me to what I believe is a game changer. There are multiple pieces and it starts with a 30Pin-to-USB power cable with waterproof backdoor (link).
It's $23.90 + $4.90 for shipping. It fits the Hero 3+ and the Hero 4.
Basically, you just plug it in the back of the camera, snap on the door and shut it like you normally would.
Next you need cable glands (size PG7) and a waterproof container for the battery. For my bow camera I just used a food storage box that I found for a few bucks at Target. I drilled a hole to match the end of the cable gland and screwed it into place I added an o-ring (plumbing section in hardware store) between the outside wall of the box and contact point of the cable gland just for added waterproofing. Then I cut the USB cable about 10-12 inches from the plug and passed it through the gland. Tightened down the gland onto the cable then spliced the cable back together. There are only two wires in the USB cable so it's easy to do. You can look up how-to videos, but I just stripped off about an inch of the outside cable material and half an inch off the wires, slid on heat shrink wrap (or electrical tape works as well at the end), twisted the two wire ends together, and added a little solder (optional) for extra reinforcement. Then you can either wrap it with electrical tape or shrink the heat wrap with a lighter.
I mainly use a YakAttack Panfish Portrait for the bow camera and simply tuck the battery box into the main hatch. The cable is long enough to use extension accessories like the Dog Bone as well and still stow the battery below deck.
I chose two different types of batteries. For the bow camera I got a 10,000 mAh power bank. To give you an idea, the Hero 4 battery is 1160 mAh and the Brunton All-Day is 4000 mAh. The 10,000 mAh battery will last a long time. For the monopod (or YakAttack Boomstick), I opted for a smaller, lighter 5200mAh battery. The keep the weight and bulk down, I used a heavy duty ziplock type bag to keep the battery dry. I added stainless steel washers, neoprene washers and a little contact cement for the cable gland since the plastic bag is flexible.
The E-Case 13 had two slots at the corners so I attached a velcro strap through each one to wrap the battery bag around the pole and keep it in place.
I've taken these set ups on 3 long trips so far and have been very happy with them. I have yet to run out of juice on the bow cam. The one on the monopod runs out after about 6.5 hrs of keeping it on the whole time with the wifi connected to the remote and maxing out a 64gb card (I upgraded the card recently). The new Smart Remote from GoPro lasted about 6 hrs as well without turning it off.
Now if only they made a waterproof microphone for GoPros...
Tuesday, April 7, 2015
Still Messin' Around on the River
While looking forward to getting back to the Chesapeake, the James River in hometown Richmond has kept me entertained. Quick trips after work have yielded an abundance of hickory shad as well as some white perch, herring, and American Shad. Reports of big catfish and some stripers have picked up as well.
Remember you are not allowed to possess herring or American Shad.
Jeff Lockhart and I hit the river after work on Monday. It took a bit to find the fish but once we did it was hook up after hook up. Shad flies as well as spoons produced many hits. After the sun went down we put out chunks of hickory shad on 8/0 circles hooks. It was slower than I was expecting but after a while, Jeff's kayak started dragging anchor as he went to work hauling in a good size fish. An impressive set of splashes caught enough interest from me to pull my anchor up to see what it was.
Jeff crushed his previous personal best blue catfish with this fat 43"er.
We stuck around a little longer, messed with smaller cats, and called it a good night in RVA. The short drive back home left little time to plan the next trip,
but we both agree...
The salt calls.
Labels:
American Shad,
Blue catfish,
Catfish,
Hickory Shad,
James,
River,
RVA,
Shad
Subscribe to:
Posts (Atom)